1958 Ford Town and Country AM FM Bluetooth Radio Fully assembled in the USA

HAND MADE IN THE USA! Beware of "In Stock" old stock radios!

There have been many improvements and updates again lately! Our radios are made fresh and delivered to you directly from the factory.

Small size, BIG features, Rare option! Looks original but offers today's technology! Chrome-plated metal nose and die-cast chrome Town & Country buttons look all original.

Fits your dash without any modifications! 4 X 45 watts RMS output allows up to 180 watts of audio power! Town & Country buttons seek. Town button has reduced sensitivity like original.

Town & Country buttons duplicate action of original (seeks in both directions). Analog controls look and feel like the original radio! Volume, tone, balance, fader and tuning from original looking controls! MP3, IPOD, CD XM (satellite) or iPhone c/ smartphone through auxiliary input. 7/16 shafts for mounting exactly match original radio! LED dial lights will never need replacing! Ou deserve the best - dont settle for less! It is our dream someday to be able to stock pile an unlimited supply of. These radio's, but this is just not the case, sorry for the inconvenience, due to the incredible demand.

Construction time of your radio, may vary due to limited component availability, there are so many hours. In a day, and we are working as fast as we can to fill the orders that are coming in, these are hand built. By craftsmen here in the USA! Thanks for the wonderful response to the addition of the extremely. Popular Bluetooth feature, and the incredible volume through our website sales, we are now backlogged.

About 6 to 8 weeks, so please allow and plan for this situation, and please.. I have had enough heart attacks this last season! The Bluetooth feature is hidden under normal circumstances. The radio will play and pushbuttons will function just like all of our other radios. And there are no external indications that would detract from the original look of the radio.

All Bluetooth functions are accessed through the pushbuttons when in the. You can still connect other devices through the AUX jack on the back of the radio, but when Bluetooth is active it will have priority. There are some differences in terminology between phones and other Bluetooth devices, so what follows is a generic.

Explanation of how to operate your radio. Entertainment electronics can be distracting. Make sure the following procedures are done before you leave your driveway.

Your radio will remember the last 4 Bluetooth devices that have been paired with it. X is the current firmware version. If no other Bluetooth devices are connected when the radio is initially turned on, the radio will enter pairing mode automatically. If the radio doesn't detect a nearby Bluetooth.

After about 30 seconds it will exit the pairing mode. This illustration shows all of the Bluetooth connected features currently available.

Typically, you should only need to do this the. Start a search for devices Turn the radio on and wait for. Note: If no other Bluetooth devices are connected when the radio is initially turned on, the radio will enter pairing mode. If the radio doesn't detect a nearby Bluetooth device after about 30 seconds it will exit the pairing mode. To access these features you must put your radio in the Auxiliary Mode See the instructions that came with your radio for how to enter.

If you are paired but not connected, just press and release the center button. Your radio will make an audible acknowledgment that it is now connected. Your radio is operating much like a wireless headset. You can stream music and/or make and. Answer calls without taking your eyes off the road. This avoids getting blasted when switching between audio sources. If it detects an incoming call, the radio will ring. Rough the speakers and switch to Bluetooth mode if you are listening to the radio programming. You may chose to ignore the. Playing where it left off, or you may ANSWER by pressing the middle button. If another call comes in while you are already on. And hold the middle button to HANG UP or end the call. The radio will acknowledge each condition with an audible tone.

Not in Bluetooth mode when the call came in, the radio will return to its previous state. While a call is in progress, you may adjust the volume for the incoming call to make it easier to hear the caller. Buttons to raise or lower the caller's volume. When the call is ended, the volume will return to the default. To place a call to someone in your phonebook (note: not all phones support this feature), you must be connected and in Bluetooth.

Press and hold the VOICE COMMAND button. When you hear the acknowledge tone, say "Call Home" or any name that is in.

You may pause or play the selection at any time by pressing. Navigate the playlist by using the PREV.

The EQ button on the right allows you to adjust the. Ound of your music with EQUALIZER settings. Each time you press and hold the EQ button the color of the indicator LED will change.

The color indicates the new setting according to the table below. Your setting is saved and will be used each time you play.

Each time you PAUSE , and then PLAY your music the LED will briefly display the color of your current equalizer setting. The item "1958 Ford Town and Country AM FM Bluetooth Radio Fully assembled in the USA" is in sale since Sunday, February 17, 2019. This item is in the category "eBay Motors\Parts & Accessories\Vintage Car & Truck Parts\Radio & Speaker Systems". The seller is "spautoradio" and is located in Palm Harbor, Florida. This item can be shipped to United States, Canada.

Modified Item: No
Custom Bundle: No
Non-Domestic Product: No
Warranty: Yes