Fully Assembled New

AnaTek Blue ESR/Low Ohms Meter Fully Assembled

AnaTek Blue ESR/Low Ohms Meter Fully Assembled
AnaTek Blue ESR/Low Ohms Meter Fully Assembled
AnaTek Blue ESR/Low Ohms Meter Fully Assembled
AnaTek Blue ESR/Low Ohms Meter Fully Assembled

AnaTek Blue ESR/Low Ohms Meter Fully Assembled

The AnaTek Blue ESR/Low Ohms. Is the latest and best Bob Parker design and successor to the famous Dick Smith ESR/Low Ohms Meter. Handy and and measures capacitor equivalent series resistance (ESR) in-circuit. ESR is a very important characteristic of capacitors greater than 1 uF.

This meter makes measurements which are often impossible to check with capacitance meters. Also great for measuring very low values of resistance. See manual for more details. It has quality flex test leads with banana plugs and alligator clips included.

This is an indispensable piece of test equipment for a system designer or product technician! Supplied in Fully Assembled with. Two foot leads made with super flexible test lead wire with 4mm banana plugs. Test lead resistance compensation, improves measurement accuracy.

Wide resistance measurements from 0.01 Ohm to 99 Ohm. Automatic power off when reading is unchanged for 3 minutes. Easy-to-read, high brightness 0.5 inch (13mm) piercing blue LED display.

Easy to read chart of good capacitor ESRs on the front panel with capacitor voltage values from 10V-450V, 1->10,000uF capacitance. Test ESR on polarized and non-polarized capacitors with the value of >1 uF. Measures ESR for capacitors in circuit, ideal for PCB level de-bug. Can also be used to test the low resistance grounding of ANSI/ESD S20.20, ANSI/ESD S6.1, ESD TR20.20 and compliance verification for grounding systems. Assess health for alkaline and rechargeable batteries.

Operational down to 5.5v battery voltage, maximizes battery life. Standard 9 volt battery included. Built in Silicon Valley, California, USA. Comparison of some ESR meters.

Out on the market today. For advice on operation and de-bug and.

In the use of the ESR meter. Page for pins on Capacitor testing and ESR tester reviews. For more info see the. View a great informational page. Created by a satisfied customer and.

Some independent reviews of the Blue ESR/Low Ohms Meter from. Our Malaysian distributor has also published an excellent. The most from your ESR meter. From our Past Customers on the Web. I ordered tweezers for making it easier to test on board components. Even without the tweezers, this esr meter is easy to use with an easy to read chart on the front G. That goes a long way in my book well, if I had a book. It will be worth the price the first time you diagnose a clean looking cap that is in fact internally damaged Dan A Peterson. "I use a "Blue ESR Meter which works great for testing ESR in circuit, as well as battery health, such as AA alkaline and re-chargeables. I found it's accuracy to be close to that of a Sencore analyzer with a 5 digit price tag ThatOneGuy. Saw Uncle Doug using this on YouTube and thought I should get this as I had an old Fender amp I was restoring. This is the tool to have for checking old electrolytic capacitors. Very useful to identify bad capacitors that otherwise would not be detected. If you repair or work with vintage electronics you need this. Even without the tweezers, this esr meter is easy to use with an easy to read chart on the front. My guess is that battery usage would be similar to that of a typical ohm meter. It will be worth the price the first time you diagnose a clean looking cap that is in fact internally damaged. Also see the companion Blue. For FBT/LOPTs and Hi-Q inductors. The item "AnaTek Blue ESR/Low Ohms Meter Fully Assembled" is in sale since Saturday, July 6, 2013. This item is in the category "Business & Industrial\Test, Measurement & Inspection\Test Meters & Detectors\Capacitance & ESR Meters". The seller is "alltronics" and is located in Santa Clara, California.

This item can be shipped worldwide.

  • MPN: BESR
  • Brand: Anatek


AnaTek Blue ESR/Low Ohms Meter Fully Assembled